Materials

Filament for your FELIX printer

Five materials that cover almost every job, from a first prototype to a part that lives outdoors. We supply filament made by FormFutura, the Dutch filament manufacturer. Tested on FELIX printers, with print profiles ready to use.

Choose your material

Which material do you need?

MaterialBest forPropertiesPrinting
PLA
EasyFil ePLA
Prototypes, concept models, visual aidsStiff, accurate, clean surface. Softens around 55 °CBeginner. Easiest to print. No closed chamber needed
PETG
EasyFil ePETG
Functional parts, housings, manufacturing aidsRigid, impact and chemical resistant, strong layer bondingBeginner. Easy. No closed chamber needed
ABS
TitanX
Engineering parts, fit tests, end-use partsImpact resistant, heat resistant (Vicat 93 °C), fine detailBeginner. Closed build chamber recommended
ASA
ApolloX
Outdoor parts, mechanical and automotive partsUV and weather resistant, strong, heat resistant (Vicat 98 °C)Intermediate. Closed build chamber needed
TPU
Python Flex 90A
Seals, bumpers, dampers, snap-fit partsFlexible (Shore 90A), wear and tear resistant, resists oils and chemicalsIntermediate. Keep the filament dry

The range

Five materials

PLA

EasyFil ePLA

The easy all-rounder for prototypes, concept models and education. Sharp detail and a clean surface.

Spools of 1 kg and 2.3 kg · 6 colours

PETG

EasyFil ePETG

Tough and forgiving. For functional parts, housings and manufacturing aids. Prints almost as easily as PLA.

Spools of 1 kg and 2.3 kg · 5 colours

ABS

TitanX

Engineering ABS for strong parts that see heat or load, with minimal warping and no styrene smell.

Spools of 0.75 kg and 2.3 kg · 4 colours

ASA

ApolloX

UV and weather resistant engineering ASA. For mechanical parts that live outdoors and for automotive use.

Spools of 0.75 kg and 2.3 kg · 5 colours

TPU

Python Flex 90A

Flexible and wear resistant, Shore 90A. For seals, bumpers, dampers and snap-fit parts.

Spools of 0.5 kg and 1 kg · 2 colours

Open filament system

Prefer another brand? That works too

FELIX printers are not locked to our filament. You can print with material from any supplier, as long as it suits your printer. Not sure what fits your application? We are happy to advise.

Questions?

Talk to an expert

Tell us what you want to print. We get back to you as soon as possible.